Fancy Brick Watch Winder (Green)
- FITS MOST WATCHES: Spring action pillow is designed to fit all watch bracelet and strap sizes. It can be used for men’s as well as women's watches. The maximum watch case diameter is 2.2" (55 mm).
- STACKABLE DESIGN: Contacts on the top and bottom surfaces of the watch winder make it stackable - only one AC adapter is used for powering a set of 12 watch winders. As your collection grows, you just need to “add another Brick"! Accessory boards and Add-On modules are sold separately.
- FULL COMPATIBILITY: 45 available winding programs meet all existing winding requirements. You can set the number of Turns-Per-Day from 650 to 3600 TPD.
- PERFECT PRESENTATION: Watch comes to rest in 12 o'clock position for a better display after each winding cycle.
- HIGH PRECISION WINDING: An electronic controller counts every turn of your watch to maintain supreme winding precision.
- ULTRA-QUIET : Japanese motor and new winder mechanics provide improved performance and low running noise.
Availability: In stock
Stackable Single Watch Winder with 12 O'clock Rotor Stop Position
Watch winder description:
Maximum watch case diameter: 2.2 inches (55 mm);
Turns-Per-Day range: 650 to 3600 TPD;
Warranty: 1 year;
AC power adapter included (100-240V, 50-60Hz).
Contacts on the top and bottom surfaces of the watch winder make it stackable - only one AC adapter is used for powering a set of 12 watch winders. Accessory Board is required to build a set of watch winders. Accessory boards and other accessories are sold separately.Power adapter is included with Fancy Brick watch winders and NOT INCLUDED with accessory boards.
All rotors stop at 12 o'clock position after each winding cycle for a better display of your watch collection.
Three rotation directions are available: clockwise, counterclockwise and bi-directional (mixed). In mixed mode, the rotor rotates clockwise and counterclockwise alternately. An electronic controller counts every turn of the watch to maintain supreme winding precision. Transparent cup protects your watch from dust.
- Soft polyurethane watch pillows;
- 3 winding directions;
- 45 winding programs;
- 12 o'clock rotor stop position;
- Gift box included;
Product dimensions (W x L x H): 4" x 4" x 4.5" (10 cm x 10 cm x 11 cm)
Product weight: 1.1 lbs (0.5 kg)
Keep your watch wound!
A watch winder is a device with an electrical motor which will automatically wind your watch when you are not wearing it. Automatic watches have a limited power reserve, so if you stop wearing them and winding them up, they will run down in two or three days. The reserve depends on the watch brand and on movement (caliber) used.
When your timepiece stops, you must reset time and wind up your watch. If it has additional functions (like date, moon-phase display, perpetual calendar), resetting them may take a lot of time and require certain skills. With an automatic watch winder, you can keep your timepiece wound and ready to go!
Please note: If your watch doesn't wind itself from wrist motion, it cannot be wound by an automatic watch winder. Watch winders are not compatible with Seiko Kinetic Watches because their watch mechanism is different from the traditional one.
The watches shown in the pictures are not included.
Please note: Watch winding mode (winding direction and TPD setting) depends on your watch model. Please, check your owner's manual or contact your watch brand's customer service for detailed information.
You can also refer to our watch winding parameters table.
Watch Winder Programming
To turn on the watch winder touch the power symbol until the LED light is on.
The watch winding mode (the winding direction and the Turns-Per-Day setting) depends on the watch model. Please check the user manual of your watch or contact your watch brand customer support for detailed information.
The three-position direction switch sets the direction of rotation. There are three settings available: clockwise, counterclockwise and the bi-directional (mixed) mode. In mixed mode, the rotor rotates clockwise and counterclockwise alternately.
The four-position Turns-Per-Day (TPD) switch controls the number of rotations. There are 15 TPD settings available. Set the switches to the following position to set the desired TPD number:
Abest BOXY was established in Taiwan in 2000 and is specializing in the manufacturing of watch winders since September 2001. BOXY’s products have successfully found its market place due to the affordable price for devices with low level of power consumption, attractive elegant design and operational reliability.
We offer the following product series of this brand on our web-site:
BRICK WINDER SYSTEM
This is a unique system intended to wind and store automatic watches. Brick represents the construction material. And this is exactly how the system works: you can build your winding system brick by brick by adding new blocks powering each other.
FANCY BRICK SYSTEM
Fancy Brick Winder System is an advanced equivalent of Brick Winder System. It has been complemented by a vivid external design and a range of colors, ON/OFF touch-sensitive button, 45 winding modes and increased height of external lid.
Castle product line: A lid that slowly moves down imitates the movement of a draw bridge of medieval castle, which highlights the greatness of this building. White LED-lighting allows to see your watch in the dark. Castle winders are produced in two different colors and three modifications: to wind up one, two or four watches.
BOXY winders are produced in Taiwan using MABUCHI Japanese motors, so that they work almost silently.
BOXY devices are equipped with electronic system which counts the number of turns. Watch winder rotor always stops at same position.
Watch Winder Store is an authorized distributor of BOXY products in the USA.
|SKU||Fancy Brick(F) Gn|
|User Manual CMS Block||UserManualBoxyFancyBrick|
|Maximum Watch Diameter||2.2" (55 mm)|
|Watch Winding Slots||1|
|Number of Rotors||1|
|Watch Holder Type||Polyurethane|
|Watches on Rotor||1|
|Power Adapter||AC 100-240V 50-60Hz|
|Item Length (inch)||4.3|
|Item Width (inch)||3.9|
|Item Height (inch)||4.3|