H1 Single watch winder (Carbon)
H1 Single watch winder (Carbon) H1 Single watch winder (Carbon) H1 Single watch winder (Carbon) H1 Single watch winder (Carbon) H1 Single watch winder (Carbon) H1 Single watch winder (Carbon) H1 Single watch winder (Carbon) H1 Single watch winder (Carbon) H1 Single watch winder (Carbon) H1 Single watch winder (Carbon) H1 Single watch winder (Carbon) H1 Single watch winder (Carbon) H1 Single watch winder (Carbon) H1 Single watch winder (Carbon) H1 Single watch winder (Carbon)

H1 Single watch winder (Carbon)

SKU: H1-CA
    • UNIVERSAL COMPATIBILITY: 78 available winding programs meet all existing winding requirements. You can set the number of Turns-Per-Day from 620 to 1800 TPD.

    • FITS ALL WATCHES: Telescopic watch holder fits any bracelet and strap sizes and can be used for men’s as well as women’s watches. The maximum watch case diameter is 2.6 inches (65 mm).

    • EASY USE & SETUP: An LCD display makes the setup process simple. An electronic controller counts every turn of the watch to maintain SUPREME WINDING PRECISION.

    • PERFECT PRESENTATION: The rotor comes to rest in 12 o'clock position after each winding cycle for a better display of your watches.

    • STUNNING APPEARANCE: Watch winder with a high-gloss finish will fit perfectly in any interior. The DOOR LOCK prevents unwanted access.

    • INTERIOR BACKLIGHT : Your watch will look especially beautiful in the dark. NOISELESS RUNNING won't disturb your sleep.

Availability: In stock

$135.00
Boda Concept
Product Description
Details

Boda Concept Single Watch Winder with LED Interior Light and 12 O'clock Rotor Stop Position

Watch winder description:
Exterior finish: High-gloss piano lacquer;
Interior lining: Black velvet;
Maximum watch case diameter: 2.6 inches (65 mm);
Turns-Per-Day range: 620 to 1800 TPD;
Warranty: 2 years;
AC power adapter included (100-240V, 50-60Hz).

The rotor stops in 12 o'clock position after each winding cycle for a better display of your watch.

Three rotation directions are available: clockwise, counterclockwise and bi-directional (mixed). In mixed mode, the rotor rotates clockwise and counterclockwise alternately.

Spring loaded telescopic watch holder can be used for watches with any strap and bracelet sizes. The holder automatically adjusts to any wrist size from 6" to 8.5" (15.5 to 21.5 cm). Soft velvet finish protect your watch and bracelet from scratches.

An electronic controller counts every turn of the watch to maintain supreme winding precision.

Speed Winding mode allows full winding of а previously stopped watches. If night mode is activated, the winder stops operating for 12 hours and will not disturb you during the night.

Product features:

  • Telescopic watch holder;
  • 3 winding directions;
  • 78 winding programs;
  • LCD display;
  • 12 o'clock rotor stop position;
  • Electronic rotations counter;
  • LED interior light;
  • Night mode (daytime winding option);
  • Speed-winding option;
  • Door lock;
  • Gift box included;

Product dimensions (W x L x H): 18 cm (7.1") x 14 cm (5.5") x 17 cm (6.7")
Product weight: 1.65 kg (3.6 lbs)

Keep your watch wound!

A watch winder is a device with an electrical motor which will automatically wind your watch when you are not wearing it. Automatic watches have a limited power reserve, so if you stop wearing them and winding them up, they will run down in two or three days. The reserve depends on the watch brand and on movement (caliber) used.

When your timepiece stops, you must reset time and wind up your watch. If it has additional functions (like date, moon-phase display, perpetual calendar), resetting them may take a lot of time and require certain skills. With an automatic watch winder, you can keep your timepiece wound and ready to go!

Please note: If your watch doesn't wind itself from wrist motion, it cannot be wound by an automatic watch winder. Watch winders are not compatible with Seiko Kinetic Watches because their watch mechanism is different from the traditional one.
The watches shown in the pictures are not included.

Please note: Watch winding mode (winding direction and TPD setting) depends on your watch model. Please, check your owner's manual or contact your watch brand's customer service for detailed information.
You can also refer to our watch winding parameters table.

User Manual

Control Panel

Boda Concept H1 watch winder control panel

Watch Winder Set Up

Watch winding mode (the winding direction and the Turns-Per-Day setting) depends on the watch model. Please check the user manual of your watch or contact your watch brand customer support for the detailed information.
The watch winder uses the number of Rotations-Per-Hour (R.P.H.) value to program the rotors. To convert the Turns-Per-Day (TPD) value into the Rotations-Per-Hour (R.P.H.) value, divide the TPD value by 24 hours. For example: If your watch requires 850 TPD, divide 850 TPD by 24 hours: 850/24 = 35.4 R.P.H.

Winder Programming

1. Set the number of Rotations-Per-Hour (R.P.H). Press the ► button several times until R.P.H. display starts flashing. Press [OK] button. The R.P.H. display will flash slower.
Use ▲ and ▼ buttons to set an R.P.H. value. Press [OK] to confirm the R.P.H. setting.
2. Set the winding direction. Press the ► button several times until RIGHT/LEFT display starts flashing. Use ▲ and ▼ buttons to set a winding direction. Select RIGHT for clockwise winding mode, LEFT for counterclockwise or LEFT+RIGHT for mixed mode (clockwise + counterclockwise). Press [OK] to confirm the setting.
3. Press [OK] to activate the program. The START/STOP display will show ► and the rotor will start moving

Functions Overview

1. SLEEP MODE
With SLEEP MODE enabled, the winder works for 12 hours and stays motionless for the next 12 hours. If the SLEEP MODE is enabled, the number of rotations per day is doubled for a 12 hours working period.
To activate SLEEP MODE, press the ► button several times until SLEEP mode display starts flashing. Press [OK] button. The SLEEP mode display will flash slower. Use ▲ and ▼ buttons to switch it ON or OFF. Press [OK] to confirm the setting.

2. SPEED WINDING
This mode is intended for winding the watch which has stopped. Once SPEED WINDING mode is activated, the winder performs 480 turns in both directions (240 turns in clockwise direction and 240 turns in counterclockwise direction). After that the winder returns to its programmed operation.
To activate SPEED WINDING mode, press the ► button several times until SPEED WINDING display starts flashing. Press [OK] button. The SPEED WINDING display will flash slower. Use ▲ and ▼ buttons to switch it ON or OFF. Press [OK] to confirm the setting.

3. INTERIOR LIGHT
The light is controlled by the yellow button on the back panel.

Brand Info

BODA Concept has recently appeared on the watch winder market as a subsidiary and more cost-saving division of PAUL DESIGN. The company’s concept is to combine the luxury and advanced technologies with the ease of use and low price. Thanks to the successful combination of price and quality, BODA CONCEPT winders have immediately become one of the market leaders.

All winder cases have natural exterior wood finish and are covered with high-gloss lacquer. Each unit has interior light and an LCD control panel with touchscreen option for easy setup.

A SERIES

Existing models can wind up 2, 3 or 4 watches. Available finish colors: carbon fiber, macassar and dark burl. There is a USB connector on the back side of the device which allows the smartphone charge.

B SERIES

The watch winderes with classical design. All models come with an additional box to store watches, cufflinks, documents or jewelry. Available in carbon fiber, Macassar and walnut finish. Suitable to wind up 6 watches.

C SERIES

Produced in modifications to wind up 1, 2, 3 and 4 watches. Available finish colors: carbon fiber, Macassar, walnut and dark burl. Glass door with metallic inserts and a storage drawer for watches and jewelry. The USB connector on the back side allows to charge a smartphone.

D SERIES

Intended for true watch fans and collectors. The serie include models for winding 9 and 12 watches. Watch winders of D series are available in the following colors: carbon fiber, Macassar, walnut, black, white and dark burl.

E SERIES

Compact winders for a single watch. Available in following colors: carbon fiber, Macassar, walnut, black, white and dark burl. The watch winder has a built-in rechargeable battery and can work for a long time without being plugged in. If you own highly-valued or rare models of watch, you may put E series winder to the safe to protect your watch and make sure that its mainspring is wound and the watch is ready to go.

F SERIES

Contains watch winders for 2, 3 and 4 watches. Available colors: carbon fiber, Macassar, dark burl and walnut. The watch winders have watch storage compartments for 3, 5 or 6 watches under the upper lid.

All watch winders have LCD displays with touchscreen option, which allow to set up a required winding mode fast and easy.

Watch Winder Store is an exclusive distributor of Boda Industrial Co. products in the USA.

Specifications
Additional Info
SKU H1-CA
Brand Boda Concept
Country China
Exterior Color Carbon
Exterior Finish Wood
Interior Color Black
Interior Material Velvet
Maximum Watch Diameter 2.6" (65 mm)
Watch Winding Slots 1
Number of Rotors 1
Watch Holder Type Telescopic
Watches on Rotor 1
Winding Programs 78
Glass Lid Yes
Door Lock Yes
Interior Light Yes
LCD Display Yes
Power Adapter AC 100-240V 50-60Hz
Warranty 24 months
Item Weight (lbs) 3.6
Item Length (inch) 5.5
Item Width (inch) 7.1
Item Height (inch) 6.7
Reviews
Write Your Own Review

Only registered users can write reviews. Please, log in or register

You may also be interested in the following product(s)