Gentleman 6 Premium watch winder (Black Apricot)
- MULTIPLE SETTINGS: 3 settings for rotation mode and multiple Turns per Day (TPD) settings.
- FITS MOST WATCHES: Spring-loaded telescopic holders fit all watch bracelet and strap sizes.
- LCD DISPLAY: Shows all information on watch winder modes.
- MAXIMUM USABILITY: Independently controlled winder modules and remote control unit.
- LED BACKLIGHT: The watch winder has built-in LED backlight.
Availability: In stock
An automatic watch winder for 6 watches , LCD touchscreen control, LED backlight and remote control unit by Paul Design.
Exterior style: Wood;
Outer finish: Multi-layer high-gloss piano lacquer;
Interior lining: Velvet;
Interior color: Black;
Power adapter included.
Warranty: 12 months.
Maximum watch diameter: 2.6 inches.
- LCD display;
- Touchscreen control;
- Remote control;
- Telescopic watch holder;
- LED interior backlight;
- Glass lid;
Product size: 16.5 x 8.5 x 10.8 inches;
Package dimensions: 12.6 x 14.4 x 20.5 inches;
Product weight: 18.3 lbs;
Package weight: 25.4 lbs.
What is an automatic watch winder?
A watch winder is a device with an electrical motor which will automatically wind your watch when you are not wearing it. Automatic watches have a limited power reserve, so if you stop wearing them and winding them up, they will run down in two or three days. The reserve depends on the watch brand and on movement (caliber) used.
When your timepiece stops, you must reset time and wind up your watch. If it has additional functions (like date, moon-phase display, perpetual calendar), resetting them may take a lot of time and require certain skills. With an automatic watch winder, you can keep your timepiece wound and ready to go!
Please note: If your watch doesn't wind itself from wrist motion, it cannot be wound by automatic watch winder. Watch winders are not compatible with Seiko Kinetic Watches because the watch mechanism is not the same as traditional automatic movement watches.
Please note: Watch winding mode (winding direction and TPD setting) depends on your watch model. Please, check your owner's manual or contact your watch brand's customer service for detailed information.
You can also refer to our watch winding parameters table.
Only use the adaptor supplied with this watch winder.
ALWAYS turn off the power before inserting or taking out watches. Unplug the adaptor when the watch winder is not being used. DO NOT rotate the winder turntable at any time. DO NOT place the watch winder in direct sunlight or in environments that are either damp or dusty.
TOUCH-SCREEN CONTROL PANEL OVERVIEW
1. Pause and running status display
2. Rotation direction display
3. Automatic mode display
4. Pause function button - Press “O” to pause for 5 minutes, and then press “O” again to restore the operating
5. Selected winder / Hour display
6. Rotation per hour (RPH)/ Minutes display
7. Winder on/off
8. Automatic mode button – Automatic mode：default setting (36 rotations per hour；both directions) to winder all the watches, this mode is suitable for most of the watches.
REMOTE CONTROL FUNCTION OVERVIEW
Press the Clock symbol to set the clock. Continue to press “ O ” Setting in turn: →AP/MP →hours →minutes →store. In setting status, press “▲” and “▼” to adjust the values of settings.
Press “▲” and “▼” to select the setting targets. Available options：ＡＬ(all)、 1、2…...
Once the number of winder is selected, select the Rotation-Per-Day "RPH”.
Press “▲” and “▼” to adjust the values of settings, these are the settings available: from 20RPH to 80RPH, increasing or decreasing in even numbers. Each watch has a unique RPH setting; please select the closest setting for your watch.
Next, select the rotation direction of the watch. These are 3 directions available: Clockwise winding, counter-clockwise winding, or bi-directional winding. Each watch has a unique directional setting; please select the appropriate setting for your watch.
Finally, PRESS the "ON" function to start the selected winder.
The company specializing in manufacturing watch winders under Paul Design brand was founded by a leading technical expert, Paul Chen, who worked with such brands as Buben & Zörweg, Swiss Kubik and Elma. The company’s mission is to combine modern Swiss technologies, reliable mechanisms and premium luxury materials. However, the product prices are quite affordable due to the fact that production is based in Hong kong.
The following product lines of this manufacturer is provided in our online-store:
This product line includes models both with or without additional compartment for watch storage. A new function “speed winding” makes it possible to wind up watch in a very short time. With “sleep mode”, you can switch the winding cycle to daytime mode. All boxes from this product line are supplied with a remote control device.
Models from this product line are produced in 6 different colors: carbon, macassar, white, black, dark burl, walnut. You may select boxes for one, two, four or eight watches. The model does not have a front door, which makes it convenient for embedding it into the furniture systems or safes. Moreover, you can use not only a network adapter, but also a rechargeable battery as a source of power supply.
All boxes are equipped with electronic control panels with touchscreen, which makes it possible to accurately and conveniently establish a required winding mode.
Watch-winder.Store is an exclusive dealer of Paul Design products in the USA.
|Exterior color||Black Apricot|
|Maximum watch diameter (inch)||2.6|
|Watch winding slots||6|
|Watch holder type||Telescopic|
|Watches on rotor||1|
|Item length (inch)||8.5|
|Item width (inch)||10.8|
|Item height (inch)||16.5|