Leader Watch Winders Quad Watch Winder (Brown + Beige)
Leader Watch Winders Quad Watch Winder (Brown + Beige) Leader Watch Winders Quad Watch Winder (Brown + Beige) Leader Watch Winders Quad Watch Winder (Brown + Beige) Leader Watch Winders Quad Watch Winder (Brown + Beige) Leader Watch Winders Quad Watch Winder (Brown + Beige) Leader Watch Winders Quad Watch Winder (Brown + Beige) Leader Watch Winders Quad Watch Winder (Brown + Beige)

Leader Watch Winders Quad Watch Winder (Brown + Beige)

SKU: 345S-Br

  • FITS MOST WATCHES: Spring-loaded telescopic watch holders fit any bracelet and strap sizes and can be used for men’s as well as women’s watches. The maximum watch case diameter is 2.4 inches (60 mm).

  • UNIVERSAL COMPATIBILITY: Individually programmed rotors and 15 available winding programs meet all existing winding requirements. You can set the number of Turns-Per-Day from 650 to 1950 TPD.

  • INTERIOR BACKLIGHT: The watch winder has built in LED lights. Your watches will look especially beautiful in the dark.

  • PERFECT PRESENTATION: The watches come to rest at the same position after each winding cycle for a better display.

  • EASY USE & SETUP: An LCD display with touch control makes the setup process simple.

  • GREAT APPEARANCE: Brown watch winder with a faux leather finish will fit perfectly in any interior.


Notify me when this product is back in stock
Loading...

Availability: Out of stock

$284.00
Leader
Product Description
Details

4 Watch Winder with Interior Light and Soft Faux Leather Finish

Watch winder description:
Exterior finish: Faux leather
Interior lining: Faux leather;
Maximum watch case diameter: 2.4 inches (60 mm);
Turns-Per-Day range: 650 to 1950 TPD;
Warranty: 1 year;
AC power adapter included.

All rotors stop at the same position after each winding cycle for a better display of your watch collection.

Product features:

  • Telescopic watch holders;
  • 4 individually programmed winder rotors;
  • 3 winding directions;
  • 15 winding programs;
  • LED interior backlight;
  • Coordinated rotor stop position;
  • LCD display with touch control;

What is an automatic watch winder?

A watch winder is a device with an electrical motor which will automatically wind your watch when you are not wearing it. Automatic watches have a limited power reserve, so if you stop wearing them and winding them up, they will run down in two or three days. The reserve depends on the watch brand and on movement (caliber) used.

When your timepiece stops, you must reset time and wind up your watch. If it has additional functions (like date, moon-phase display, perpetual calendar), resetting them may take a lot of time and require certain skills. With an automatic watch winder, you can keep your timepiece wound and ready to go!

Please note: If your watch doesn't wind itself from wrist motion, it cannot be wound by an automatic watch winder. Watch winders are not compatible with Seiko Kinetic Watches because their watch mechanism is different from the traditional one.
The watches shown in the pictures are not included.

Please note: Watch winding mode (winding direction and TPD setting) depends on your watch model. Please, check your owner's manual or contact your watch brand's customer service for detailed information.
You can also refer to our watch winding parameters table.

User Manual

LCD Display

Leader watch winder LCD display

Touch Control Panel

Leader watch winder touch control panel

Watch Winder Programming

Each rotor can be programmed independently.
1. Press [Rotor Selection] several times to select the setting target. You will see your selection on the rotor indicator display.
2. Once you have selected the rotor to program, select the winding direction for your watch by pressing [Rotation Direction]. The display shows the selected mode in Turning Direction section. There are three settings available: clockwise, counterclockwise and the bi-directional (mixed) mode. In mixed mode, the rotor rotates clockwise and counterclockwise alternately.
3. Select the number of Turns-Per-Day (TPD) by pressing [TPD Selection] .
4. Press [START/STOP]. The working status display will start flashing and the selected rotor will start moving. (If the Motor-Stop Option is enabled, it will start moving after you close the door).

Interior Light

Press [LIGHT ON/OFF] to turn the interior lights ON or OFF. The light can also be controlled by the red switch on the rear panel and by the [LED ON/OFF] button on the remote control.
Please note: Some watch winders do not have this option.

Motor-Stop Option

To prevent a winding mechanism breakdown, it is recommended to put a watch into a rotor or take it out only when the rotor is stopped. If the Motor-Stop option is enabled, all the rotors will stop once you open the door. To enable this option, flip the small black switch on the back panel to the ON position.
The rotors will not rotate if the Motor-Stop option is enabled and the door is open. Please keep the door of the watch winder closed for its proper operation.
Please note: Some watch winders do not have this option.

Brand Info

Leader Watch Winders is our own brand.

Since 2010, we have learned to create functional, attractive, and most importantly, reliable watch winders. Every year we launch new models. Each of them becomes a symbol of quality and convenience.

In order to minimize our production costs, we placed our manufacturing facilities in Guangzhou, China, where we also organized a design department in addition to the production premises.

Our major market outlets are the USA and Russia. We are planning to launch an online shop in Germany by the end of 2020 to supply Europe with our winders.

Apart from winder production, we upgrade safe boxes into safe storage units for your watch collection. Safe boxes are covered with faux and real leather and equipped with internal watch winding systems. Many safe boxes also have an alarm system.

In 2020, we are launching our new model 8030 for winding 30 watches simultaneously. Moreover, this model will have a separate rotor for each watch.

We are proud of our products and we hope you will enjoy using Leader Watch Winders!

Specifications
Additional Info
SKU 345S-Br
Brand Leader
Country China
Exterior Color Brown
Exterior Finish Faux Leather
Interior Color Beige
Interior Material Faux Leather
Maximum Watch Diameter 2.4" (60 mm)
Watch Winding Slots 4
Number of Rotors 4
Watch Holder Type Polyurethane
Watches on Rotor 1
Winding Programs 15
Interior Light Yes
LCD Display Yes
Touch Control Yes
Power Adapter AC 100-240V 50-60Hz
Warranty 12 months
Item Weight (lbs) 6.4
Item Length (inch) 9.4
Item Width (inch) 7.1
Item Height (inch) 10.2
Reviews
Write Your Own Review

Only registered users can write reviews. Please, log in or register

You may also be interested in the following product(s)