Watch Winder for 6 watches
- FITS MOST WATCHES: Polyurethane watch holders fit any bracelet and strap sizes and can be used for men’s as well as women’s watches. The maximum watch case diameter is 2.8 inches (70 mm).
- UNIVERSAL COMPATIBILITY: Individually programmed rotors and 27 available winding programs meet all existing winding requirements. Customizable winding mode allows you to set the number of Turns-Per-Day from 20 to 7200 TPD.
- GREAT APPEARANCE: Watch winder with a high-gloss finish and macassar wood insets will fit perfectly in any interior.
- INTERIOR BACKLIGHT : Your watch collection will look especially beautiful in the dark. 7 backlight colors are available.
- EASY USE & SETUP: An LCD display with touch control makes the setup process simple.
- The DOOR LOCK allows you to prevent unwanted access.
Availability: In stock
Watch Winder with Customizable TPD Setting and Interior Light
Watch winder description:
Exterior finish: High-gloss piano lacquer;
Interior lining: Velvet;
Maximum watch case diameter: 2.8 inches (70 mm);
Turns-Per-Day range: 20 to 7200 TPD;
Warranty: 1 year;
AC power adapter included (100-240V, 50-60Hz).
Watch winder rotors can be programmed to operate independently. You can set an individual program for each rotor depending on the watch model you place into it.
Three rotation directions are available: clockwise, counterclockwise and bi-directional (mixed). In mixed mode, the rotor rotates clockwise and counterclockwise alternately.
The control panel allows you to set up a custom winding program. You can set a number of Turns-Per Day from 20 to 7200 TPD combined with any winding direction (CW, CCW or bi-directional). This option provides compatibility with all existing and future watch models.
The watch winder has built-in interior LED lights. You can choose one of 7 available backlight colors or enable a variable lighting mode. In this mode, the backlight changes its color repeatedly.
- Soft polyurethane watch pillows;
- 6 Individually programmed winder rotors;
- 3 winding directions;
- 27 preset programs;
- Customizable winding mode;
- LED interior light with 7 available colors;
- LCD touchscreen control panel;
- Door lock;
Product dimensions (W x L x H): 8" x 14" x 12" (20 cm x 36 cm x 31 cm)
Product weight: 11 lbs (5 kg)
Keep your watch wound!
A watch winder is a device with an electrical motor which will automatically wind your watch when you are not wearing it. Automatic watches have a limited power reserve, so if you stop wearing them and winding them up, they will run down in two or three days. The reserve depends on the watch brand and on movement (caliber) used.
When your timepiece stops, you must reset time and wind up your watch. If it has additional functions (like date, moon-phase display, perpetual calendar), resetting them may take a lot of time and require certain skills. With an automatic watch winder, you can keep your timepiece wound and ready to go!
Please note: If your watch doesn't wind itself from wrist motion, it cannot be wound by an automatic watch winder. Watch winders are not compatible with Seiko Kinetic Watches because their watch mechanism is different from the traditional one.
The watches shown in the pictures are not included.
Please note: Watch winding mode (winding direction and TPD setting) depends on your watch model. Please, check your owner's manual or contact your watch brand's customer service for detailed information.
You can also refer to our watch winding parameters table.
LCD Display with Touch Control
Watch Winder Programming
Each rotor can be programmed independently.
Watch winding mode (winding direction and Turns-Per-Day setting) depends on the watch model. Please check the user manual of your watch or contact your watch brand customer support for detailed information.
1. Press [ROTOR] several times to select the setting target. You will see your selection in the Rotor Indicator Section on the display.
2. Having selected the rotor to program, select the winding direction for your watch by pressing the [DIRECTION] button. There are three settings available: clockwise, counterclockwise and the bi-directional (mixed) mode. In mixed mode, the rotor rotates clockwise and counterclockwise alternately.
3. Select the number of Turns-Per-Day (TPD) by repeatedly pressing [TPD]. There are nine TPD settings available: 360 – 670 – 860 – 960 – 1080 – 1200 – 1440 – 1800 – 2180.
You can customize the number of Turns-Per-Day choosing from 20 to 7200 TPD. Press [TPD] several times until 3 flashing digits  show up in the TPD Value Section on the display. Use ▲ and ▼ to select the value yon need. Each touch of ▲ or ▼ changes the TPD number by 20.
4. Press [START/STOP]. The selected rotor number will show up on the display and the rotor will start moving.
To prevent breakdowns of the winding mechanism, it is recommended to put a watch into a rotor or take it out only
when the rotor is stopped. If the Motor-Stop Option is enabled, all the rotors will stop once you open the door.
The rotors will not rotate while the door stays open. Please keep the door closed for proper operation of the watch winder.
Please note: Some models do not have Motor-Stop option.
To turn the interior light ON press [LIGHT] button. The watch winder has 8 backlight modes. By pressing [LIGHT] continuously, you can choose red (R), green (G), blue (B) color or their combinations: green-blue (GB), red-green (RG), red-blue (RB) or white (RGB). The corresponding abbreviation will appear on the LIGHT STATUS display in the upper right corner of the control panel.
The other backlight mode available is variable lighting. In this mode, the backlight changes its color repeatedly. This mode is indicated
by the flashing R-G-B abbreviation. To turn the interior light OFF press the [LIGHT] button several times until the light sign disappears on the light status display.
Please note: Some watch winders do not have interior light.
There are two ways to put a watch on the watch pillow depending on your wrist size:
BODA Concept has recently appeared on the watch winder market as a subsidiary and more cost-saving division of PAUL DESIGN. The company’s concept is to combine the luxury and advanced technologies with the ease of use and low price. Thanks to the successful combination of price and quality, BODA CONCEPT winders have immediately become one of the market leaders.
All winder cases have natural exterior wood finish and are covered with high-gloss lacquer. Each unit has interior light and an LCD control panel with touchscreen option for easy setup.
Existing models can wind up 2, 3 or 4 watches. Available finish colors: carbon fiber, macassar and dark burl. There is a USB connector on the back side of the device which allows the smartphone charge.
The watch winderes with classical design. All models come with an additional box to store watches, cufflinks, documents or jewelry. Available in carbon fiber, Macassar and walnut finish. Suitable to wind up 6 watches.
Produced in modifications to wind up 1, 2, 3 and 4 watches. Available finish colors: carbon fiber, Macassar, walnut and dark burl. Glass door with metallic inserts and a storage drawer for watches and jewelry. The USB connector on the back side allows to charge a smartphone.
Intended for true watch fans and collectors. The serie include models for winding 9 and 12 watches. Watch winders of D series are available in the following colors: carbon fiber, Macassar, walnut, black, white and dark burl.
Compact winders for a single watch. Available in following colors: carbon fiber, Macassar, walnut, black, white and dark burl. The watch winder has a built-in rechargeable battery and can work for a long time without being plugged in. If you own highly-valued or rare models of watch, you may put E series winder to the safe to protect your watch and make sure that its mainspring is wound and the watch is ready to go.
Contains watch winders for 2, 3 and 4 watches. Available colors: carbon fiber, Macassar, dark burl and walnut. The watch winders have watch storage compartments for 3, 5 or 6 watches under the upper lid.
All watch winders have LCD displays with touchscreen option, which allow to set up a required winding mode fast and easy.
Watch Winder Store is an exclusive distributor of Boda Industrial Co. products in the USA.
|Maximum Watch Diameter||2.8" (70 mm)|
|Watch Winding Slots||6|
|Number of Rotors||6|
|Watch Holder Type||Polyurethane|
|Watches on Rotor||1|
|Power Adapter||AC 100-240V 50-60Hz|
|Item Length (inch)||8.3|
|Item Width (inch)||14.4|
|Item Height (inch)||11.8|