4 Watch Winder with Motor-Stop Option (Carbon)
- FITS MOST WATCHES: Soft PU watch pillows fit most strap and bracelet sizes and can be used for men’s as well as women’s watches. The maximum watch case diameter is 2 inches (50 mm).
- MOTOR-STOP OPTION: When you open the door, the rotors will stop. This option allows you to prevent the breakdown of the winding mechanism when you put the watch into the rotor or take it out.
- UNIVERSAL COMPATIBILITY: 15 predefined programs meet all existing watch winding requirements.
- STYLISH APPEARANCE: Watch winder with a high-gloss finish will fit perfectly in any interior.
- The DOOR LOCK allows you to prevent unwanted access.
- INTERIOR LIGHT: The watch winder has a built-in white LED light. Your watches will look especially beautiful in the dark.
Availability: In stock
4 Watch Winder with Motor-Stop Option
Watch winder description:
Exterior finish: High-gloss piano lacquer;
Interior lining: PU leather;
Maximum watch case diameter: 2" (50 mm);
Warranty: 1 year.
The watch winder has a Motor-Stop option. If enabled, all rotors will stop once you open the door. This option prevents the breakdown of the winding mechanism when you install or remove the watch.
The automatic watch design does not allow the main spring to get ‘overwound’ but the precise setting of the number of turns per day prevents excessive wear of the winding mechanism. 15 available winding programs provide compatibility with all watch models. You can set the number of turns per day in the range from 650 to 1950 TPD in combination with any rotation direction.
Three rotation directions are available: clockwise, counterclockwise and bi-directional (mixed). In the mixed mode, the rotor rotates clockwise and counterclockwise alternately.
Watch winder rotors can be programmed to operate independently. You can set an individual program for each rotor depending on the watch model you place into it. Unused rotor can be disabled.
White interior light will give your watch collection a stunning look in the dark. The door with a large window provides a perfect display of your collection and protects it from dust.
The watch pillows fit most strap and bracelet sizes. The pillows are made of soft polyurethane and will never scratch your watch or bracelet.
The door lock prevents unwanted access. No one will get to your watches without permission.
- Soft polyurethane watch pillows;
- 3 winding directions;
- 15 available programs;
- Individually controlled rotors;
- Turns-per-day range: 650 to 1950 TPD;
- Motor-Stop option;
- Interior light;
- Door lock;
- Battery power option (2 D batteries not included);
- Universal AC power adapter (100-240V, 50-60Hz).
Product dimensions (W x L x H): 9" x 11.75" x 7.75" (23 cm x 30 cm x 20 cm)
Product weight: 6.2 lbs (2.8 kg)
What is an automatic watch winder?
A watch winder is a device with an electrical motor which will automatically wind your watch when you are not wearing it. Automatic watches have a limited power reserve, so if you stop wearing them and winding them up, they will run down in two or three days. The reserve depends on the watch brand and on movement (caliber) used.
When your timepiece stops, you must reset time and wind up your watch. If it has additional functions (like date, moon-phase display, perpetual calendar), resetting them may take a lot of time and require certain skills. With an automatic watch winder, you can keep your timepiece wound and ready to go!
Please note: If your watch doesn't wind itself from wrist motion, it cannot be wound by an automatic watch winder. Watch winders are not compatible with Seiko Kinetic Watches because their watch mechanism is different from the traditional one.
The watches shown in the pictures are not included.
Please note: Watch winding mode (winding direction and TPD setting) depends on your watch model. Please, check your owner's manual or contact your watch brand's customer service for detailed information.
You can also refer to our watch winding parameters table.
Watch Winder Controls
Winding Mode Setting
Watch winding mode (the winding direction and the Turns-Per-Day setting) depends on the watch model.
Please check the user manual of your watch or contact your watch brand customer support for the detailed information.
The direction of rotation and the number of turns per day is set by 2 control knobs.
Three direction settings are available: clockwise, counterclockwise and the bi-directional (mixed) mode. In mixed mode, the rotor rotates clockwise and counterclockwise alternately.
There are 5 Turns-Per-Day settings available: 650, 750, 850, 1000 and 1950 TPD.
If your watch requires a different number of turns per day, select a higher TPD value.
Some watch winder models use one set of control knobs to control two watch winder rotors simultaneously. You should use simultaneously controlled rotors for watches with same winding requirements.
Interior Light *
Use the small black switch on the back panel to switch the light ON or OFF.
* Please note: Some watch winders do not have this option.
Motor-Stop Option *
To prevent a winding mechanism breakdown, it is recommended to put a watch into a rotor or take it out only when
the rotor is stopped. If the Motor-Stop option is enabled, all the rotors will stop once you open the door.
To enable this option, flip the small red switch on the back panel to the ON position.
The rotors will not rotate if the Motor-Stop option is enabled and the door is open. Please keep the door of the watch winder closed for its proper operation.
* Please note: Some watch winders do not have this option.
|Interior Material||Faux Leather|
|Maximum Watch Diameter||2.0" (50 mm)|
|Watch Winding Slots||4|
|Number of Rotors||2|
|Watch Holder Type||Polyurethane|
|Watches on Rotor||2|
|Power Adapter||AC 100-240V 50-60Hz|
|Item Weight (lbs)||6.2|
|Item Length (inch)||11.75|
|Item Width (inch)||9|
|Item Height (inch)||7.75|